|
Home
E12
E24
E28
E30
E34
E36
Z3
E39
E46
X5/E53
ALL
Ron Stygar
Carl Buckland
Dale Beuning
Forums
Help
From digest.v5.n531 Fri Nov 8 22:03:14 1996
From: "Steve D'Gerolamo" <steved3_at_village.ios.com>
Date: Fri, 08 Nov 1996 15:55:00 -0500
Subject: Rear Subframe Bushings
I had mentioned earlier that the shop time to do this job can be as high as
7 hours since many shops without the special tools have to remove the
subframe and press the new bushings in on their shop press. Removal of the
old bushings can be accomplished with an air chisel or sawzall but getting
the new ones in is very difficult without the tools. I sell the factory
installation tools to my parts customers at just over cost...price for the
E28/E24/E23 tools is $180.00, the E30 tool set runs $175.00 and the
E36/E32/E34 set is $295.00. Someone posted that these tools can also be
used for the rear wheel bearings but the BMW fiche clearly calls for a
different set. I don't have the wheel bearing tool at this point to know
what the differences are. SD
Steve D'Gerolamo c/o The Ultimate Garage, Emerson, NJ (201-262-0412)
Unofficial Homepages:
[Home]
[E12]
[E24]
[E28]
[E30]
[E34]
[E36]
[Z3]
[E39]
[E46]
[X5/E53]
[ALL]
[ Help ]
|