Home
E12
E24
E28
E30
E34
E36
Z3
E39
E46
X5/E53
ALL
Ron Stygar
Carl Buckland
Dale Beuning
Forums
Help
From: PShovestul_at_aol.com
Date: Sun, 25 Aug 1996 22:35:36 -0400
Subject: <E30> OBC and Cruise Control installation
Like the fellow digester (from the UK I believe), I too have successfully
completed the installation of the on-board computer into my '86 325. Since I
was contemplating open heart surgery on the dash, I decided to install the
cruise control also. The parts were obtained from a 325es that had an
misunderstanding with another vehicle. Parts were removed from donor vehicle
by inspection and just like the manual says, " installation is the reverse of
removal ". Start at one end of the harness and label / remove everything
connected to the harness. All connections for both installations are
plug-ins.
OBC parts consist of display unit, harness, relay box (black plastic about
1.5" x 4" x 6" mounted near ABS ECU), turn signal switch, and horn. The
donor vehicle had most of the front end removed so I couldn't find the horn.
This horn is supposed to sound for 30 seconds after three attempts to start
the car without entering the correct code. If any other digesters can provide
insight on the location of this horn along with the color codes of the wires,
please e-mail direct. I believe it is mounted on the drivers side below the
bumper and inside the valance panel. The turn signal switch is needed if you
want to retain the feature that allows you to cycle through the OBC displays
by pressing the end of the turn signal switch. The relay box is essential. It
disables the main relay or the fuel pump relay, depending on year and model,
Cruise control parts consist of an ECU & bracket, harness, clutch switch &
bracket, servo assembly & bracket, steering column switch, connection adapter
from rear of instrument cluster. The cruise control installation is detailed
in the factory service manual and provides useful insight, but in hardly
essential.
Return-Path: <scotsman_at_msp.sc.ti.com>
From: Paul Marshall <scotsman_at_msp.sc.ti.com>
Subject: Re: E30 analog
To: chrisp_at_doe.carleton.ca (Christopher A. Pawlowicz) (Christopher A. Pawlowicz)
Date: Wed, 29 Jan 97 9:03:06 CST
Mailer: Elm [revision: 70.85]
Hi Chris
> Hi,
>
> saw your post and hoped for some more info..
>
There are somethings to watch out for. You must have the correct coding
plug for your model of car otherwise the mpg/range/speed functions will
give you incorrect readings. Try and get an obc from the same model of car
but if you can't don't worry, you can always fork out for the coding plug
(sorry, don't know the cost here in US). The installation is a breeze.
Just swap out the units and put in the new cable. If you don't want the
code function or the stalk control then that's it!
I've not tried to install the code function (I have all the parts) as
I want to use the output to electronically control the rev limit of the
car when other people (service guys etc) will be driving it.
I'll send you a complete copy of the US parts list (all E30 cars).
If you don't receive it by then end of the week then send me a reminder
as I'll probably have forgotten - life/work is very busy just now.
> I have the clock/temp and want OBC but am not sure what parts I need..
>
> can you give me a run down ?
>
> I think I need:
> display unit
Yes. with the correct code plug.
> harness
Yes. There are actually two required if you want the code function.
> relay box
Only if you wand the code function
> turn signal switch
Only if you get it for free. Imho it's not worth the hassle.
> horn
Only if you want the code function and associated alarm
>
> is this correct ?
Yip
>
> thanks
Your welcome. If you need more help then just ask.
Ciao
Paul
Return-Path: <scotsman_at_msp.sc.ti.com>
From: Paul Marshall <scotsman_at_msp.sc.ti.com>
Subject: obc parts list (FYI)
To: chrisp_at_doe.carleton.ca (Christopher A. Pawlowicz) (Christopher A. Pawlowicz)
Date: Wed, 29 Jan 97 9:11:56 CST
Mailer: Elm [revision: 70.85]
3 M M 3 3 3 3 3
1 4 3 2 2 2 2 2
8 2 5 5 5 5 5
E E i i
Item Description S X Symbol From To Part #
------------------------------------------------------------------------------
1 Input unit 1 1 1 1 1 1 12/83 65 81 1 386 867
1 Input unit 1 1 1 1 1 1 CDN 12/83 65 81 1 386 868
2 Coding Plug 1 1 1 12/83 09/86 65 81 1 373 686
2 Coding Plug 1 1 1 09/86 09/87 65 81 1 381 795
2 Coding Plug 1 09/87 65 81 1 381 793
2 Coding Plug 1 1 1 08/87 65 81 1 385 941
2 Coding Plug 1 09/87 65 81 1 381 792
2 Coding Plug 1 09/87 65 81 1 380 891
NEXT ENTRY APPLIES ONLY TO ADDITIONAL FUEL TANK
2 Coding Plug 1 1 1 65 81 1 381 320
3 Bulb 2 2 2 2 2 2 62 11 1 368 299
4 Housing 1 1 1 1 1 1 65 81 1 375 461
5 Cover 1 1 1 1 1 1 65 81 1 374 938
6 Screw 4 4 4 4 4 4 07 11 9 907 605
7 Relay 1 1 1 1 1 1 65 81 1 373 726
8 Screw 1 1 1 1 1 1 07 11 9 916 973
9 Nut 1 1 1 1 1 1 61 13 1 372 722
10 Gong 1 1 1 1 1 65 81 1 376 047
10 Gong 1 65 81 1 374 926
11 Bracket 1 1 1 1 1 1 62 13 1 373 572
12 Dip/dim switch 1 1 1 1 1 1 61 31 1 375 190
NEXT ENTRY APPLIES ONLY TO SRS
12 Dip/dim switch 1 1 1 1 1 1 61 31 1 377 966
13 Wiring (comp) 1 1 1 1 1 1 12/83 09/87 61 12 1 373 727
13 Wiring (comp) 1 1 1 1 1 1 09/87 61 12 1 385 794
14 Wiring (alarm) 1 1 1 1 1 1 12/83 09/86 61 12 1 373 729
14 Wiring (alarm) 1 1 1 1 1 1 09/86 09/87 61 12 1 381 207
14 Wiring (alarm) 1 1 1 1 1 1 09/87 05/89 61 12 1 386 258
14 Wiring (alarm) 1 1 1 1 05/89 61 12 1 386 982
15 Temp. Sensor 1 1 1 1 1 1 1 12/83 05/89 65 81 1 385 337
15 Temp. Sensor 1 1 1 1 1 05/89 65 81 8 350 779
16 Bracket 1 1 1 1 1 1 1 1 12/83 65 81 1 370 116
17 Gasket ring 1 1 1 1 1 1 1 1 12/83 07 11 9 963 070
18 Bracket 1 1 1 1 1 1 1 1 12/83 61 13 1 371 074
19 Cable strap 1 1 1 1 1 1 1 1 12/83 61 13 1 377 134
20 Horn 1 1 1 1 1 1 1 12/83 09/86 61 33 1 367 359
20 Horn 1 1 1 1 1 1 1 1 09/86 61 33 1 379 090
21 Cover 1 1 1 1 1 1 1 12/83 09/86 65 81 1 373 714
21 Cover 1 1 1 1 09/86 65 75 1 385 907
22 Screw 1 1 1 1 1 1 1 1 12/83 12 13 8 530 118
23 Screw 1 1 1 1 1 1 1 1 12/83 07 11 9 916 966
24 Body Nut 1 1 1 1 1 1 1 1 12/83 16 11 1 152 613
25 Bracket horn 1 1 1 1 1 12/83 61 33 1 380 019
25 Bracket horn 1 12/82 09/87 61 33 1 380 019
25 Bracket horn 1 1 1 1 08/87 65 75 1 385 783
26 Wire signal horn 1 1 1 1 1 1 1 1 12/83 61 12 1 380 016
--
Paul Marshall Phone : +1 (972) 997 5954
Texas Instruments FAX : +1 (972) 997 3428
EC II email : scotsman_at_msp.sc.ti.com
Dallas, Texas msgid : KILT
USA
Unofficial Homepages:
[Home]
[E12]
[E24]
[E28]
[E30]
[E34]
[E36]
[Z3]
[E39]
[E46]
[X5/E53]
[ALL]
[ Help ]
|