|
Home
E12
E24
E28
E30
E34
E36
Z3
E39
E46
X5/E53
ALL
Ron Stygar
Carl Buckland
Dale Beuning
Forums
Help
From digest.v6.n829 Sat Jun 28 17:01:35 1997
From: "Steve D'Gerolamo" <steved3_at_idt.net>
Date: Sat, 28 Jun 1997 10:25:49 -0400
Subject: Brake Rotor Allen Screws
Be very careful removing the allen screws from your brake rotors as correct
replacements are very hard to come by right now. I have been unable to get
the correct pitch bolts from any of my suppliers including 3 local dealers.
BMW doesn't appear to be too concerned about it....they'll probably just
force the bolts in and you'll have to work about getting them out 30k miles
from now. If you go to the dealer to buy these, take a common 8x1.25mm nut
with you to check for proper pitch. The nut will screw on approx 2 threads
and then lock up if it's one of the new (mis-manufactured) Ribe production.
SD
Steve D'Gerolamo c/o The Ultimate Garage, Emerson, NJ Tel 201-262-0412
Email.... steved3_at_idt.net Web Site.... http://www.ultimategarage.com
Unofficial Homepages:
[Home]
[E12]
[E24]
[E28]
[E30]
[E34]
[E36]
[Z3]
[E39]
[E46]
[X5/E53]
[ALL]
[ Help ]
|