Bimmerboy1989
Joined: 19 Aug 2003 Posts: 476 Location: Houston, Texas
|
Posted: Fri Nov 19, 2010 6:57 pm Post subject: Suspension renewal |
|
|
I am getting parts together for a suspension rebuild. I want to run the E36 Rack so I am going to get http://www.akgmotorsport.com/catalog/catalog.php?category=e30%20S50%2FM50%20Swap. One question though. I know the E30 outer tie rod ends need to be used, but what about the inner tie rod ends? Can a E36 inner tie rod end be used? Also I am going to do all suspension. control arms(moog), Sway bar links front and rear(moog), lower ca bushings E36 M3 solid rubber, Tie rod ends(moog), springs, shocks, struts, and sub frame bushings. Should I go urethane on the shock mounts/strut mounts/trailing arm bushings? If so what kind? Also springs, should I go lowering springs? Which Brand? Eibach? H&R? Keep in mind this car is not a daily driver. It is a project car so The rougher "Street/Race" like suspension is fine with me. Also I know if I go with lowering springs I need to go with sport shocks and struts. |
|