View previous topic :: View next topic |
Author |
Message |
ozarkbimmer
Joined: 11 Feb 2004 Posts: 117 Location: NWA
|
Posted: Wed Jul 28, 2004 9:54 am Post subject: Error 1263 |
|
|
I know that this is a purge valve error and that the car is acting like it has a vaccum leak somewhere. I snooped around a little bit today and can't find anything so far. I tried resetting the codes and that didn't work, it comes right back after a few minutes of driving. Any help is greatly appreciated. |
|
Back to top |
|
|
|
Arne
Joined: 10 Jan 2003 Posts: 1454 Location: Oregon
|
Posted: Thu Jul 29, 2004 7:08 am Post subject: Error 1263 |
|
|
Check the gas cap seal. |
|
Back to top |
|
|
ozarkbimmer
Joined: 11 Feb 2004 Posts: 117 Location: NWA
|
Posted: Fri Jul 30, 2004 10:07 am Post subject: Error 1263 |
|
|
The gas cap seal is fine. |
|
Back to top |
|
|
gigel
Joined: 12 Sep 2002 Posts: 1533 Location: Dallas/TX
|
Posted: Fri Jul 30, 2004 4:03 pm Post subject: Error 1263 |
|
|
The purge valve (on 328 at least) is located underneath the intake hose/brake cylinder, on the left side. I think it's easy to remove from the car, and you can check and see if it's closing/opening when you apply voltage. Hope this helps. |
|
Back to top |
|
|
|