View previous topic :: View next topic |
Author |
Message |
tncean
Joined: 26 Feb 2005 Posts: 1652 Location: Chattanooga, Tn.
|
Posted: Mon Nov 18, 2013 7:38 am Post subject: camshaft oil seal?? |
|
|
Plan to do tbelt c/o later this week. Have o-ring and seal for cam.
Would appreciate any suggestions on changing the oil seal and o-ring, as there is a small oil leak from that area.
90 325i.
Thanks... T |
|
Back to top |
|
|
See all UnofficialBMW Ads
|
beejay
Joined: 18 Nov 2002 Posts: 1158 Location: Eastern, Pa
|
Posted: Mon Nov 18, 2013 1:51 pm Post subject: |
|
|
It's pretty straight forward. nothing special that I can remember. Been a number of years though.
You need an torx socket for the cam pulley bolts. the seal housing may be stuck a little so work it off gently. pay attention to the depth of the seal as installed in the housing.
helps to take some fine emery cloth to the seal area on the cam to clean it up a bit. _________________ Bob
92 325ic gone
14 BRZ ltd
05 Tundra SR5 TRD
01 VFR800fi - 03 DR650S - 83 CB1100F - 82 CB900F - 69 CB750 |
|
Back to top |
|
|
|