View previous topic :: View next topic |
Author |
Message |
94 E32 4.0
Joined: 12 Jun 2008 Posts: 2 Location: Olalla, WA.
|
Posted: Thu Jun 12, 2008 4:49 am Post subject: Need Parts!!! |
|
|
I just got an e32 740i, I've put some goodies on it however, I need a line on some springs, dme, calipers, ect...... Have any ideas let me know! _________________ On a mission to build the ultimate sleeper |
|
Back to top |
|
|
See all UnofficialBMW Ads
|
edjack
Joined: 04 Feb 2002 Posts: 3887 Location: San Jose, CA
|
Posted: Thu Jun 12, 2008 10:13 am Post subject: |
|
|
Try bavauto.com, but I don't think the 7-series is popular with the aftermarket suspension industry.
Get the Bentley's manual.
Consider installing a 6-speed. Check with Brett Anderson, at koalamotorsport.com.
Do you know if the block has been replaced? Brett has an article on the Nikasil block, and how to identify it:
http://www.koalamotorsport.com/tech/article-m60v8.asp _________________
Ed BMW CCA member since 1987 (Nr. 62319).
'97 540i 6 speed Aspensilber over Aubergine interior. |
|
Back to top |
|
|
94 E32 4.0
Joined: 12 Jun 2008 Posts: 2 Location: Olalla, WA.
|
Posted: Fri Jun 13, 2008 2:08 am Post subject: |
|
|
I did go to Bavauto and got some high performance coil packs and an upper strut brace. I went to Turner motorsport to get a chip but I have to upgrade my dme. I do believe that the block has been exchanged however i'll have to check on that. so thanks for the artical. _________________ On a mission to build the ultimate sleeper |
|
Back to top |
|
|
|