View previous topic :: View next topic |
Author |
Message |
cse
Joined: 18 Dec 2007 Posts: 3
|
Posted: Mon Dec 31, 2007 7:46 pm Post subject: Spark Plug Removal |
|
|
Are the coil packs difficult to remove (I removed the wire from the clip and the two mounting nuts)? I am concerned about pulling too hard and damaging the plug. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
zthreescotty
Joined: 23 Feb 2008 Posts: 2 Location: Kennewick, WA
|
Posted: Sat Feb 23, 2008 8:22 pm Post subject: Just pull |
|
|
Once you remove the two screws holding on the coil you just have to pull. It might be a little tight but it will pop off. Then get an extension with a plug socket and swap out your plugs. When reinstalling the coil, make sure you have it pushed on and tight as it will go and then put the two screws back on. Very simple, but a little scary if they stick and you've never had them off before. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
muwrx
Joined: 28 Feb 2008 Posts: 1
|
Posted: Thu Feb 28, 2008 10:10 am Post subject: |
|
|
may i know how to find the extension with a plug socket? i tried to remove the coil plug, but i realized the coil plug just couldnt get the spark plug out.
thanks a lot. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|